Ordinance No. 20533 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. 20533 AN ORDINANCE CONCERNING DEER FENCING; AMENDING SECTIONS 9.2750 AND 9.2751 OF THE EUGENE CODE, 1971;AND PROVIDING FOR AN EFFECTIVE DATE. THE CITY OF EUGENE DOES ORDAIN AS FOLLOWS: Section 1. The development standard for “Fences” in Table 9.2750 of Section 9.2750 of the Eugene Code, 1971, is amended to provide as follows: 9.2750Residential Zone Development Standards. In addition to applicable provisions contained elsewhere in this code, the development standards listed in this section and in EC 9.2751 to EC 9.2777 shall apply to all development in residential zones. In cases of conflicts, standards specifically applicable in the residential zone shall apply. The following Table 9.2750 sets forth the residential zone development standards, subject to the special development standards in EC 9.2751. Table 9.2750 Residential Zone Development Standards (See EC 9.2751 Special Development Standards for Table 9.2750.) R-1R-1.5R-2R-3R-4 Fences (14) (Maximum Height Within 6 feet42 inches6 feet6 feet6 feet Interior Yard Setbacks) (Maximum Height within Front 42 inches42 inches42 inches42 inches42 inches Yard Setbacks) Deer FencingSee EC -------- 9.2751(14) (c) Section 2. Subsection (14) of Section 9.2751 of the Eugene Code, 1971, is amended to provide as follows: 9.2751Special Development Standards for Table 9.2750. (14)Fences. (a)Types. The type of fence (including walls or screens) used is subject to specific requirements stated in the landscape standards beginning at EC 9.6200 Purpose of Landscape Standards. The standards apply to walls, fences, and screens of all types including open, solid, wood, metal, wire, masonry or other material. Use of barbed wire and electric fencing is regulated in EC 6.010(d) Fences. (b)Location and Heights. 1.Except as provided in subsection (c) below, fences up to 42 inches in height are permitted within the required front yard Ordinance -Page 1of 3