Ordinance No. 20390 - Laserfiche WebLink

Home Browse Search

(b) properties under single ownership shall be entitled to one curb cut per lot or parcel up to a width of 20 feet, if that is consistent with the requirements of section 7.405 and requirements for vision clearance and maximum driveway width allowed in chapter 9 of this code. Multiple curb cuts may be approved provided the applicant provides a Traffic Impact Analysis or alternative traffic safety study to: 1. Weigh additional conflicts and congestion for pedestrian, bicycle and vehicular traffic; and 2. Substantiate compelling evidence of the safety and operational benefits. Where a shared driveway curb cut or curb cuts in excess of 20 feet are requested, the maximum combined lengths per single ownership which the city manager or the manager's designee may approve are as follows: Number of Cu rb Cuts (c) Frontaae Total Lenath of Curb Cuts 40 ft. or less 1 20 feet Over 40 ft. to 100 ft. 2 20 ft. + 500/0 of frontage over 40 ft. Over 1 00 ft. to 200 ft. 3 50 ft. + 300/0 of frontage over 100 ft. Over 200 ft. to 300 ft. 4 80 ft. + 200/0 of frontage over 200 ft. Over 300 ft. to 500 ft. 5 100 ft. + 100/0 of frontage over 300 ft. Over 500 ft. 6 120 ft. + 50/0 of frontage over 500 ft. (d) The curb cut width for single family dwelling or duplex shall be no less than 12 feet. (e) The curb cut width for multi-family, commercial and industrial developments shall be no less than 20 feet. (3) The maximum length of a single curb cut, including a shared curb cut, shall not exceed 35 feet unless authorized by the city manager or the manager's designee as provided in section 7.445. Section 29. Section 7.415 of the Eugene Code, 1971, is amended to provide: 7.415 Driveways - ExistinQ Driveways. All curb cuts deemed by the city manager or manager's designee to exceed a reasonable length shall be reconstructed by the owners of the property served by such curb cuts to conform to the Ordinance - 18