Laserfiche WebLink
<br />9.638 <br /> <br />Eugene Code <br /> <br />9.644 <br /> <br />9.638 Existina Uses. Activities. uses, equipment and processes existing <br />as of January 27, 1982. that do not meet the standards set forth in <br />sections 9.636 to. 9.662 are subject to the following requirements: <br />(a) No use shall be changed in a manner that could result in <br />a greater degree of nonconformity. <br />-(b) Expansions an~ installation of new equipment or <br />processes sha 11 conform to app 1 i cab 1 e standa rds as set forth i n <br />s.ecti ons 9.636 to 9.662. . <br />(c) Time limits on existing use noise emissions that exceed <br />stipulated maximums are prescribed in section 9.644(b). <br />(d) All uses not otherwise prescribed by this ordinance <br />sha 11 conform to app 1 i cab 1 e federa 1, state, and 1 oca 1 1 aws and <br />regulations. <br />(Sections 9.638 added by Ordinance No. 18915, enacted January 27, 1982.) <br /> <br />9 . 640 New Uses. Act i vi ties, uses, equipment and processes estab 1 i shed <br />after January 27. 1982. shall observe the following requirements: <br />(a) Applicable standards as set forth in sections 9.636 to <br />9.662. When federal or state standards are more strict. they shall <br />be observed. <br />(b) Prior to issuance of a building permit or certificate of <br />occupancy, the building official may require: <br />1. Evidence that mandatory federal. state. and local <br />permits have been obtained. <br />2. Information demonstrating that the proposed use. <br />act i vi ty, process or equi pment wi 11 camp 1 y wi th app 1 i cable <br />standards set forth in secti ons9. 636 to 9.662 . This in forma - <br />t i on may be requi red as a report of findi ngs prepa red by <br />qualified engineers or other technical consultants. <br />(Section 9.640 added by Ordinance No. .18915. enacted January 27. 1982.) <br /> <br />9.642 Measurements. Accurate and representati ve measurements as necessary <br />shall be made according to accepted engineering practice. Measure- <br />ments sha 11 be made at or anywhere beyond the property 1 i nes :of the property from <br />which the emission is generated. <br />(Sections 9.642 added by Ordinance No. 18915, enacted January 27, 1982.) <br /> <br />9.644 Noise. In addition to applicable provisions in Chapter 4 of this <br />code. maxi mum sound em; ss; ons sha 11 not exceed equi va 1 ent sound <br />pressure levels in decibels, A-Weighted Scale, for anyone hour as stipulated in <br />the table in this section. These maximums are applicable beyond any property <br />lines of the property containing the noise. Equivalent sound pressure level <br />(Leq) is a measure of the sound level for anyone hour. It is the energy average <br />of all the various sounds emitted from the source during the hour. A-Weighted <br />Scale is used to adjust sound measurements to simulate the sensitivity of the <br />human ear. <br /> <br />.I <br /> <br />'.....::- <br /> <br />9-207 <br /> <br />12/23/93 <br />