Laserfiche WebLink
above the finished grade at the front building facade. <br /> b. Darkly tinted windows and mirrored windows that block two- <br /> way visibility are prohibited as ground floor windows. <br /> c. Along the vertical face of a strucmre~ of I~ets shall occur at a <br /> minimum of every 50 feet by providing at least 1 of the <br /> following: <br /> (1) Recesses, including entrances, of a minimum depth of 3 <br /> feet. <br /> (2) Extensions. including entrances, at a minimum depth of 3 <br /> feet. <br /> (3) Offsets or breaks in roof elevation of at least 3 feet in <br /> height. <br />(c) F_ront Porc~hes. Within the LDR subarea, front porches shall be provided <br /> on the ground floor of all dwelling units, other than multi-family dwelling <br /> units. Front porches shall be a minimum of 6 feet deep b3 10 fbet wide (a <br /> minimum of 60 square feet). A minimum of 60% of each porch shall be <br /> covered to provide weather protection. <br />(d) Eleyated Fini_shed Floor Elevations. Within the LDR subarea~ finished <br /> floor elevations of residential structures shall be a minim-mn of 2 feet <br /> above the grade of the sidewalks, where sidewalks are adjacent to the <br /> dwelling units. <br />(e) Roof Pitch. <br /> 1~ Within the LDR subarea, roof pkches must have gable~ hip, or <br /> gambrel forms. Minimum roof pitch for all structures except <br /> manufactured ho mes shall be 4 inches of vertical rise for each 12 <br /> inches of horizontal width (4:12)~ and with a minirnum 6-inch <br /> overhang. <br /> 2. Within the CMU, RMU and MSC subareas, pitched roofs shall <br /> provide a minimum 4:12 pitch. Flat roofs shall provide a cornice, or <br /> other decorative treatment. <br /> a. Residential and mixedmse buildings, including accessop~ <br /> buildings~ shall be constructed with pitched roofs having a <br /> gable, hip, or gambrel form. Minimum roof pitch on these <br /> buildings is 4 inches of vertical rise for each 12 inches of <br /> horizontal width (4:12), Such roofs shall have a minimum 6~ <br /> inch overhang. <br /> b. Any non-residential building may have either pitched or flat <br /> rooi~s provided that the buildings are constructed with a cornice <br /> or parapet extending a minimum of 3 feet above the roof plane, <br /> (f) Window and Do.or Treatment_s. Within the LDR subarea, all windows <br /> and doors shall provide a minimum 3-inch trim or be recessed a minimum <br /> of 3 inches to provide shadowing. <br /> (g) ~, In addition to the applicable sign standards in EC 9.{5600 through <br /> <br />Ordinance- 13 <br /> <br /> <br />