Laserfiche WebLink
<br />09/16/05 <br /> <br />subarea designation applicable to the property. Within the S*C <br />Chambers Special Area Zone, the three subareas are: <br />(1) S*C/R-1; <br />(2) S-C/R-2; <br />(3) S-C/C-2. <br />The applicable subareas shall be as shown on Map 9.3055 S-C <br />Chambers Special Area Zone, unless a different subarea designation is <br />found to be consistent with EC 9.3050 PurIJose of S-C Chambers Special <br />Area Zone. <br /> <br />9.3060 S-C Chambers Special Area Zone - Land Use and Permit ReQuirements <br />and Special Use Limitations. Except where the standards in EC 9.3065 <br />S-C Chambers Special Area Zone Development Standards specifically <br />provide otherwise: <br />(1) The land use and permit requirements and special use limitations <br />applicable in the S-C/R-1 subarea shall be those set out at EC <br />9.2740 and EC 9.2741 for uses in the R-1 zone. <br />(2) The land use and permit requirements and special use limitations <br />applicable in the S-C/R-2 subarea shall be those set out at EC <br />9.2740 and EC 9.2741 for uses in the R-2 zone. <br />(3) The land use and permit requirements and special use limitations <br />applicable in the S-C/C*2 subarea shall be those set out at EC <br />9.2160 and EC 9.2161 for uses in the C-2 zone. <br /> <br />9.3065 S-C Chambers Special Area Zone - Development Standards. <br />(1) Application of Standards. The standards in this section 9.3065 <br />apply to uses and development established within the S-C Chambers <br />Special Area Zone after [insert date of adoption of ordinance). As used <br />in this section, uresidential building" means a building containing one <br />or more dwellings. In the event of a conflict between other provisions of <br />this code and the provisions of this section, the specific provisions of <br />this section 9.3065 shall control. <br />(2) Development Standards Applicable in the S*C/R-1 Subarea. Except <br />as provided in this subsection, the development standards <br />applicable in the S-C/R-1 Subarea shall be those set forth in EC <br />9.2750 to EC 9.2777 for the R-1 zone, Special Development <br />Standards for Certain Uses in EC 9.5000 through EC 9.5850, and the <br />General Standards for all Development in EC 9.6000 through <br />9.6885. <br />(a) Lot Size Minimums for FlaQ Lots. In lieu of any conflicting <br />provisions in EC 9.2750 to 9.2777 for flag lots in the R-1 zone, <br />the following standards apply for flag lots in the S-C/R-1 <br />subarea: <br /> <br />Ordinance.. 3 <br /> <br /> <br />