Admin Order 58-16-01 - Laserfiche WebLink

Home Browse Search

manhole and show distances. Check and correct the length and/or alignment of service lines on the drawing. Cross out old footage and write in new from inspection notes. 5.06 STORMWATER VERIFICATIONS Correct or add data from the inspection notes. Verify the following stormwater information on the as -construct drawings: A. Structure Numbers All manholes, catch basins, taps, end of pipe segments, and phantoms on the plans and in the profiles must be numbered, except for pipes less than 10 inches in diameter or 25 feet in length. New numbers are provided by the City's as -construct monitor. Obtain existing numbers from the City's stormwater index maps. Add or cross out manholes, catch basins, taps, end of pipe segments, and phantom numbers on the plans per the inspection and final measurements. When a manhole is added on an existing line (segment), two new segments are created. Each segment needs a FROM and TO number. Use the line break symbol if necessary. B. Main Lines Show the final measurements of all stormwater lines (e.g., from manhole to manhole, manhole to catch basin, and catch basin/manhole to end of pipe). When a segment continues from one drawing to the next, show the total length on both drawings. Check against the inspection notes and video report and identify the video report number. If there is more than a five-foot discrepancy, document the reason. Check and correct flow lines of all fixtures and ends of pipe in the profile. Cross out old and write in new from final measurements. If the flow line from final measurement differs from the design by more than 0.10 foot or if the pipe size changed, then obtain new stormwater design data from the engineer and cross out old and write in new design data on the drawings. Show the elevation of both the top and the bottom of all stormwater structures in the profile. Check and correct catch basin type (cross .out old construction note and write in new, and change drafting symbol). Revise any pipe hydraulic data as appropriate. 5.07 STREET LIGHTS Correct or add data from the inspection notes. Verify the following street light information on the as -construct drawings: A. Pole Numbers All street light poles need to be numbered on the street light plans. Numbers can be Public Improvement Design Standards Manual, 2016 5 - 5