Resolution No. 4740 - Laserfiche WebLink

Home Browse Search

>- Sum these amounts, to derive a total cost per FEU for a specific type of development; >- Multiply the total cost per FEU for a development type by the number of FE Us for a development application. For more detailed and specific numerical data on FEU calculations, see Table 8. For formula illustrations, see Figure 5 in this Appendix. 2.2.1 MWMC Process Wastewater The MWMC wastewater SDC for development that discharges process wastewater to the wastewater system will be charged on the basis of the strength of that discharge. The rates per FEU for land uses listed in Table 10 include process wastewater charges. For uses not otherwise listed in Table 10 that include process wastewater, the MWMC SDC will be calculated by combining the charge for unit of development for general industrial uses, and adding the charge for the process wastewater FEU that matches the strength of the proposed discharge. The strength classes shown in 10 are the same strength classes used by MWMC in the user fee system. 2.2.2 MWMC Wastewater SDCs For All New Development with Annual Average Daily Flow Equal to or Greater than 100,000 Gallons, and for Existing Development Increasing Flow by or Greater than 100,000 Gallons per Day Before calculating the SDC for any development with an anticipated discharge of 100,000 gallons or more of sewage per day, the Executive Officer of the MWMC (EO) shall examine the developments impact on the twenty year schedule of capital projects. If one or more capacity-increasing projects will move into the 5-year CIP as a result of the development, the EO will establish new unit costs (based on the total costs of the amended 5-year CI P) upon which SDCs for all development will be calculated. If the MWMC wastewater SDC rate is modified, the modified fee will be applied to the development that caused the need for the modification and to all future development. City of Eugene SDC Methodology Wastewater, Page C- 8