Resolution No. 5254 - Laserfiche WebLink

Home Browse Search

found in Table 9 and the fee schedule in Appendix F. Where the stormwater SDC is a fixed amount per dwelling unit or space, it shall be determined by multiplying the applicable rate per dwelling unit or space times the number of units or spaces plus, for manufactured home park development, the SDC is based upon the impervious surface area of all additional common areas times the applicable stormwater unit cost per square foot of impervious surface area. Where the stormwater SDC is not a fixed amount per dwelling unit or space, it shall be determined by multiplying the applicable rate per square foot of impervious surface area times the total impervious surface area of the proposed development. Where a development creates impact not attributable to impervious surface area, the stormwater SDC shall be determined by evaluating equivalent impervious surface area, multiplied by the applicable rate per square foot of impervious surface area. 6.0 Parks System The parks SDC is based upon the estimated cost of capacity in future capacity -enhancing projects to serve new development, as contained in the Parks, Recreation and Open Space (PROS) Project & Priority Plan, and the estimated capacity in the existing parks system to be used by new development. The details for calculating the park SDC unit costs (rates) for residential development (per dwelling unit type) and nonresidential development (per room or per thousand gross square feet) are set forth in Appendix E. The park SDC is determined by multiplying the applicable rate by the unit of measure for the proposed development type. The costs per unit of measure and resulting rates may be found in Table 17. 7.0 Impact Reductions, Credits, and Compact Development Adjustments This section provides detail on the City's administration of SDC impact reductions, credits, and compact development adjustments. Potential sources, criteria for eligibility, and the basis for calculation of impact reductions, credits, and compact development adjustments are defined in this Methodology (including appendices) and in Eugene Code, 1971 sections 7.730 and 7.732. A list of examples of facilities and programs which are potentially eligible for these adjustments appears in Table G-1 of this section. (Note: As development standards change, some examples may no longer be considered eligible for reduction, but may influence future rates.) In no case may the sum of all approved credits, impact reductions, and compact development adjustments for a single system exceed the amount of the SDC assessed for that system for any approved building or development permit. The amount owed for SDCs may be reduced by one or more of the following processes described in this methodology: Impact Reduction, based on quantified mitigation of demand generated by the development for new identifiable capital improvements (available for transportation and stormwater system SDCs); Credit, based on the specific costs for privately engineered construction of certain public improvements as part of the development; • Credit, based upon the payment of or contribution to the cost of certain capital improvements in association with multiple -family residential projects of five dwelling units or more (available for transportation, wastewater, stormwater, and parks system SDCs); City of Eugene SDC Methodologies - General Methodology Page 8