Ordinance No. 19349 - Laserfiche WebLink

Home Browse Search

3-~~ and are 500 feet wide. Each approach surface ex- tends outward uniformly to a width of 4,00 feet at a horizontal distance of 10, OOa feet from the primary s~ur- face, its centerline being the continuation of the run- way centerline. Each approach surface extends outward and upward at a slope of 34 horizontal feet to 1 vert i- cal foot, beginning at the end of~and at the same eleva- tion as the primary surface. d. Runway 16L-34R_ approach surfaces. This i s a future runway to be ai~i gned i n a north-~south direction . It will be desigated as a secondary runway. The inner edges of the approach surfaces coincide with the width of the primary surfaces at the ends of Runway 16L-34R and are 250 feet wide. Each approach surface extends outward uniformly to a width of 1,250 feet at a hori- zontal distance of 5, 004 feet f ram the primary surface, its centerline being the continuation of the runway centerline. Each approach surface extends outward and upward at a slope of 24 horizontal feet to 1 vertical foot, beginning at the end of and at the same elevation as the primary surf ace , e. Transitional surfaces. These surfaces are ad~a- cent to the primary surfaces and the approach surfaces, The surfaces slope upward and outward 7 horizontal feet to 1 vertical foot, beginning at the sides of and at the same elevations as the primary surfaces and the approach surfaces, and extend to where they intercept the hori- zontal surface at a height of 150 feet above the airport elevation. There the Runway 16R-34L approach surfaces pass through the conical surface, there are transitional surfaces sloping outward and upward 7 horizontal feet to ~ vertical foot, beginning at the sides of and at the same e1eva~~tions as the approach surfaces, extending to where they intersect the conical surface. there the Run- way 16R-34L approach surfaces extend beyond the conical surface, there ~ are transitional surfaces sl api ng outward and upward 7 horizontial feet to 1 vertical foot, begin- ning at the sides of and at the same elevations as the approach surfaces, and extending to a horizontal dis- tance of 5,OQ0 feet measured horizontally from the edges of the approach surfaces and at right angles to the run- way centerline. f . Horizontal surface. The horizontal surface i s described by swinging arcs of 10,000 feet radii from the center of each end of the primary surfaces of Runway 16R-34L and Runway 3-21, and connecting the arcs with tangent lines. The horizontal surface is a horizontal plane 150 feet above the elevation of the airport and for purposes of this sub-~di strict shall be considered as having an elevation of 515 feet above mean sea level. The horizontal surface does not include the approach and transitional surfaces. g. Conical surface. The conical surface begins at ~rdi nonce - 3 }~ -~~ ~~ - ~~ Y