Ordinance No. 19413 - Laserfiche WebLink

Home Browse Search

Qrd~i~nanc.e~ - ~Q form to the provisions of the technical codes and all relevant laws, ordinances, rules and regulations. The first sheet of each set of plans shall state the building and street address of the work and the names and addresses of the owner of the land or building where the work is to be done and of the person who prepared the plans. In lieu of detailed specifications, the building official may approve references on the plans to a specific section or part of the structural specialty code or to other ordinances ar laws. Com- putations, stress diagrams, and other data sufficient to show the correctness of the plans shall be submitted when required by the building official , I. Structural Plans, Every person making application for work involving a structural permit shall file with the building division proper zoning information and structural plans and calculations as may be necessary to determine whether the proposed work, including, but not limited to, additions, general alterations, and change of use group clas- sifications conforms to land use regulations and the struc- tural specialty code. The plans and specifications must be complete and shall show, among other details, the following: ~. Scaled plat plan showing the location of all new construction and all existing structures on the site, including parking areas and drives, dimensions of lot and buildings, and distance from lot lines, drawn in accordance with an accurate boundary line survey. B. Scaled floor plans showing the structure's layout brooms}, room dimensions, and areas labeled as to intended use, location, and sizes of doors and windows. C. Structural plans showing framing and other support and laad~-carying structural features, including foundation plan, floor and ceiling roof system construc- tion with adequate dimensions and labeling of materials to permit a determination of code compliance and struc- tural safety. D. Plans for buildings of more than two stories in height of other than Group R, Division 3 bane- and twa~-family dwellings} and M occupancies accessary buildings thereto} shall indicate how required structural and fire-resistive integrity will be maintained where a penetration will be made for electrical, mechanical, plumbing, communication conduits, pipes and similar systems . 2. Electrical Plans. A person making application for an electrical permit on any structure, other than Group R, Division 3 bane- and two-family dwellings} and M occupancies accessory buildings thereto}, shall file with the building division proper electrical p1 ans, specifications, cal cul a- tions, and schedules as may be necessary to determine whether the installation as described will conform to the requirements of the electrical code. The plans and specifications sub- mitted must be complete and shall show, among other details, the fallowing: