Ordinance No. 19563 - Laserfiche WebLink

Home Browse Search

and ~3} ensure safe construction and installation. These signs may be in- stalled for a maximum of 28 days. These signs shall nat exceed 200 square feet in surface area. A decision of the city manager or the manager's desig- nee may be appealed to the hearings official in accordance with section 8.802 of this code. ~3} Painted wall decorations and painted wall highlights are nat subject to the prov~s~ans of this code. 8.675 Roof si ns. Roof signs shall be permitted in all sign districts where pole signs are permitted, subject to the maximum height above grade as specified for pole signs. Such roof signs shall be mounted s0 that the bottom of the roof sign is not more than one foot above the sur- face of the roof at the. sign location. 8.685 I1luminatian. All signs and other illumination within the city shal 1 be subject to the fol 1 owi ng restrictions upon i 11 umi nati on ; ~a~ Na exposed reflective type bulb, no strobe light ar incan- descent lamp which exceeds 15 watts shall be used so as to expose the face of the bulb, light or lamp to any public street; provided, however, that existing strings of lights with exposed incandescent 1 i ght bulbs may be used as fal 1 ows 15 watts maximum for the first 25 feet from the street property line. 5o watts maximum for the area from 25 feet to 50 feet from the street property line. 100 watts maximum for the area more than 50 feet from the street property line. However, the total light intensity must still comply with the illumination requirements and limitations of section 8.655~a~2; and a reflective type lamp bulb may be used, if not exposed to direct view from a public street, for the illumination of the sur- face of a sign or facade of any building or structure or any dis- play of landscaping feature. ~b~ No blinking or flash? ng 1 i ght or group of 1 i ghts shal l be allowed as part of a sign unless such device conforms to the following requirements: 1. Such device is constructed as an integral part of a sign, and is not merely attached thereto. 2. The flashing impulse shall not exceed 25 flashes per minute for single flashing segments of the sign, and 250 flashes per minute far bulbs with chasing and scintillating actions. Only one of such actions shall be permitted on any sign. 3. The brightness of bulbs within chasing or scintil- lating actions shall not exceed 11 watts. Ordinance - 15