Admin Order 53-17-01-F - Laserfiche WebLink

Home Browse Search

2.4.4.1. A layout for each floor with dimensions of all rooms and working spaces, including a legend of all symbols used. 2.4.4.2. Location, size, and materials of all air ducts, air inlets, and air outlets. 2.4.4.3. Location of all fireplaces, solid -fuel stoves and appliances, fans, warm -air furnaces, boilers, absorption units, refrigerant compressors, condensers, and the weight of all equipment weighing more than 200 pounds. 2.4.4.4. Location, size, and material of all products of combustion, vents, flues, and chimneys. 2.4.4.5. Location, size, and materials of all liquid fuel and gas piping, including gas piping regulated by the fire code, except sanitary waste and vent piping and potable water distribution piping regulated by the plumbing code. 2.4.4.6. Location and area (size) of all ventilation and combustion air openings and ducts. 2.4.4.7. Location of all air dampers and fire shutters. 2.4.4.8. Rated capacity or horsepower of all warm -air furnaces, heat exchangers, blower fans, boilers, refrigerant compressors, and absorption units. 3. Alternate Materials and Methods. The provisions of the technical codes are not intended to prevent the use of any material or method of construction not specifically prescribed by the technical codes, provided any alternate has been approved and its use authorized by the Building Official, or the Fire Marshal, or both, where materials or methods involve matters within the regulatory authority of both. Alternate materials and methods may be approved provided the proper official(s) finds that the proposed design is satisfactory and complies with the provisions of the technical codes and these regulations and that the material, method or work offered is, for the purpose intended, at least the equivalent of that prescribed in the technical codes in suitability, strength, effectiveness, fire resistance, durability, safety and sanitation. Sufficient evidence of proof shall be submitted to substantiate any claims made regarding the use of alternates. 4. Determination and Issuance of Permits 4.1 Issuance. The applications, plans, specifications, computations and other data, filed by an applicant for a permit shall be reviewed by the Building Official. If the Building Official finds that the work described in an application for a permit and the plans, specifications and other data . filed therewith conform to the requirements of these regulations, the administrative code and the technical codes and other pertinent laws and Administrative Order - Page 16 of 40